Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TABOREX TA 2111 HD - (PE-HD) - Silon s.r.o.

Material Data Center offers the following functions for TABOREX TA 2111 HD:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Taborex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Other properties - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Product Texts
TABOREX TA 1201 HD is a crosslinkable compound made by Silane grafted ethylene polymer. This graft polymer constitutes together with a TABOREX Masterbatch containing the crosslinking catalyst a “SIOPLAS-SYSTEM”. Pipes which are produced with the SILON grade TABOREX TA 1201 HD fulfil the requirements of ASTM F876, CSA 137.5, EN ISO 15875, BS 7291 and all related standards.
This system allows the compound to be extruded as a normal thermoplastic polymer
and will attain a high level of crosslinking in the processed form. The final product provides all the superior properties associated with crosslinked polyethylene.
Crosslinking Cure
The following methods are recommended:
• Autoclave using saturated steam at 100–115 °C (optimal methode)
• By immersion in hot water at 80–95 °C
• Exposure to low pressure steam
The period required to obtain the final gel content depends on the wall thickness and
the temperature. The exposure times are in the range of 4–8 hours.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 1.4 g/10min ISO 1133
Temperature 190 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Stress at break 24 MPa ISO 527
Strain at break 450 % ISO 527
Other propertiesValueUnitTest Standard
Density 950 kg/m³ ISO 1183
Bulk density 550 kg/m³ -
Processing Recommendation ExtrusionValueUnitTest Standard
Zone 1 160 - 170 °C -
Zone 2 170 - 180 °C -
Zone 3 170 - 190 °C -
Zone 4 170 - 190 °C -
Nozzle temperature 190 - 220 °C -
Characteristics
Processing
Pipe/Tube Extrusion
Features
Crosslinkable, Thermal Stability
Certifications
Food contact, Drinking water contact
Applications
Building Construction
Regional Availability
Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.