Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elix Ultra HH 4115 PG - ABS - Elix Polymers, S.L.

Material Data Center offers the following functions for Elix Ultra HH 4115 PG:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Elix datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Test specimen production
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 14 cm³/10min ISO 1133
Temperature 260 °C -
Load 5 kg -
Molding shrinkage, parallel 0.7 % ISO 294-4, 2577
Molding shrinkage, normal 0.7 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2000 MPa ISO 527
Yield stress 42 MPa ISO 527
Yield strain 7 % ISO 527
Strain at break >50 % ISO 527
Flexural modulus, 23°C 2000 MPa ISO 178
Charpy notched impact strength, +23°C 53 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 40 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 58 kJ/m² ISO 180/1A
Izod notched impact strength 41 kJ/m² ISO 180/1A
Temperature -30 °C -
Ball indentation hardness 90 MPa ISO 2039-1
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 101 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 113 °C ISO 75-1/-2
Vicat softening temperature, B 113 °C ISO 306
Coeff. of linear therm. expansion, parallel 89 E-6/K ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.6 mm -
Other propertiesValueUnitTest Standard
Density 1070 kg/m³ ISO 1183
Test specimen productionValueUnitTest Standard
ISO Data
Injection Molding, melt temperature 240 °C ISO 294
Injection Molding, mold temperature 70 °C ISO 294
Injection Molding, injection velocity 240 mm/s ISO 294
Characteristics
Processing
Injection Molding
Delivery form
Pellets, White
Special Characteristics
Platable, High impact or impact modified, Heat stabilized or stable to heat
Features
Ductile, Low Odor, Copolymer
Certifications
RoHS compliant
Regional Availability
Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.