Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYCOLOY™ FR Resin RCY6713 - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for CYCOLOY™ FR Resin RCY6713:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Cycoloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
CYCOLOY RCY6713 resin is based on high heat Polycarbonate (PC) with non-brominated and non-chlorinated flame retardant. It contains 30% post consumer recycle content with a UL-94 V0 rating @ 1.5 mm. This grade is suitable for thin wall applications that require high flow and high stiffness performance.

UL Yellow Card Link: E207780-100960579
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 16 g/10min ISO 1133
Temperature 260 °C -
Load 5 kg -
ASTM Data
Melt Flow Index, MFI 6.3 g/10min ASTM D 1238
Temperature 260 °C -
Load 2.16 kg -
Mold Shrinkage, MD 0.005 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 2300 MPa ISO 527
Yield stress 58 MPa ISO 527
Yield strain 5 % ISO 527
Stress at break 50 MPa ISO 527
Strain at break 72 % ISO 527
Flexural modulus, 23°C 2300 MPa ISO 178
Charpy notched impact strength, +23°C 48 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 13 kJ/m² ISO 179/1eA
Izod notched impact strength, +23°C 65 kJ/m² ISO 180/1A
Izod notched impact strength 17 kJ/m² ISO 180/1A
Temperature -30 °C -
ASTM Data
Tensile Modulus 2300 MPa ASTM D 638
Tensile Strength at Yield 60 MPa ASTM D 638
Tensile Strength at Break 54 MPa ASTM D 638
Elongation at Yield 5.5 % ASTM D 638
Elongation at Break 76 % ASTM D 638
Flexural Modulus 2320 MPa ASTM D 790
Izod Impact notched, 1/8 in 750 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 113 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 126 °C ISO 75-1/-2
Vicat softening temperature, B 133 °C ISO 306
Coeff. of linear therm. expansion, parallel 70 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 70 E-6/K ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10
Thickness tested 1.5 mm -
Yellow Card available yes - -
Burning behav. at thickness h V-1 class IEC 60695-11-10
Thickness tested 1.0 mm -
Yellow Card available yes - -
ASTM Data
Coefficient of Thermal Expansion, MD 77.4 E-6/K ASTM D 696
Coefficient of Thermal Expansion, TD 59.4 E-6/K ASTM D 696
DTUL @ 66 psi 126 °C ASTM D 648
DTUL @ 264 psi 112 °C ASTM D 648
Other propertiesValueUnitTest Standard
Density 1200 kg/m³ ISO 1183
Density 1190 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.04 % -
Melt temperature 270 - 300 °C -
Mold temperature 60 - 90 °C -
Zone 1 260 - 300 °C -
Zone 2 260 - 300 °C -
Zone 3 265 - 300 °C -
Nozzle temperature 265 - 300 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding
Special Characteristics
Flame retardant, Halogen-free, High impact or impact modified, Heat stabilized or stable to heat
Features
Copolymer
Certifications
Recycled Resin Content
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.