Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Beograde FLM013 T - PLA - Beologic nv

Material Data Center offers the following functions for Beograde FLM013 T:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Beograde datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Mechanical properties - Thermal properties - Other properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1190 MPa ISO 527
Yield stress 21 MPa ISO 527
Yield strain 7.1 % ISO 527
Strain at break 140 % ISO 527
Flexural modulus, 23°C 1030 MPa ISO 178
Thermal propertiesValueUnitTest Standard
ISO Data
Melting temperature, 10°C/min 115 °C ISO 11357-1/-3
Other propertiesValueUnitTest Standard
Density 1360 kg/m³ ISO 1183
Bulk density 800 kg/m³ -
Film PropertiesValueUnitTest Standard
ISO Data
Elmendorf Tear resistance, parallel 1.69 N ISO 6383-2
Elmendorf Tear resistance, normal 0.42 N ISO 6383-2
Characteristics
Processing
Film Extrusion
Delivery form
White
Special Characteristics
Transparent
Certifications
Contains renewable resources, Biodegradable
Regional Availability
Europe, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.