Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of APTIV® 1000-050G - PEEK - Victrex plc

Material Data Center offers the following functions for APTIV® 1000-050G:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Aptiv datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Product Texts
Easy to process – can be laminated to other materials, thermoformed, metallised, coated, printed, stamped and die cut, welded and heat sealed. APTIV 1000 acts an excellent electrical insulator across a wide range of temperatures and electrical frequencies.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Molding shrinkage, parallel 0.5 % ISO 294-4, 2577
Molding shrinkage, normal 0.5 % ISO 294-4, 2577
Thermal propertiesValueUnitTest Standard
ASTM Data
Coefficient of Thermal Expansion, MD 47 E-6/K ASTM D 696
Electrical propertiesValueUnitTest Standard
ASTM Data
Dielectric Strength, Short Time 190[1] kV/mm ASTM D 149
Volume Resistivity 4E16 Ohm*cm ASTM D 257
1: 50 μm
Other propertiesValueUnitTest Standard
Humidity absorption 0.04 % Sim. to ISO 62
Density 1300 kg/m³ ISO 1183
Film PropertiesValueUnitTest Standard
ISO Data
Tensile Modulus, parallel 2500 MPa ISO 527-3
Tensile Modulus, normal 2500 MPa ISO 527-3
Stress at break, parallel 130 MPa ISO 527-3
Stress at break, normal 120 MPa ISO 527-3
Maximum strain, parallel 150 % ISO 527-3
Maximum strain, normal 150 % ISO 527-3
Trouser Tear resistance, parallel 6 N/mm ISO 6383-1
Trouser Tear resistance, normal 8 N/mm ISO 6383-1
Thickness of specimen 0.05 mm -
Characteristics
Processing
Film Extrusion, Coating, Thermoforming
Delivery form
Semifinished product, Film
Special Characteristics
Flame retardant, Halogen-free, Heat stabilized or stable to heat
Features
Acoustical Barrier Properties, Barrier Properties, Good Adhesion, Heat Sealable, Laser Markable, Low Emission, Low Smoke, Tribologic Grade, Weldable
Chemical Resistance
General Chemical Resistance, Hydrolytically Stable, Radiation Resistance
Certifications
Food contact, Food approval 1935/2004/EC, Food approval FDA 21 CFR, RoHS compliant
Applications
Aircraft and Aerospace, Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.