Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of AGILITY™ EC 7220 - (PE-LD) - The Dow Chemical Company

Material Data Center offers the following functions for AGILITY™ EC 7220:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Agility datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 1.5 g/10min ASTM D 1238
Temperature 190 °C -
Load 2.16 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Stress at break 13.7 MPa ISO 527
Strain at break 540 % ISO 527
Flexural modulus, 23°C 230 MPa ISO 178
ASTM Data
Shore D Hardness 52 - ASTM D 2240
Thermal propertiesValueUnitTest Standard
ASTM Data
Vicat Temperature 90 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Density 918 kg/m³ ASTM D 792
Characteristics
Processing
Other Extrusion, Compression Molding
Features
Crosslinkable, Foamable, Melt Strength
Certifications
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.