Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of FIL-A-GEHR PC/ABS® - (PC+ABS) - Gehr GmbH

Material Data Center offers the following functions for FIL-A-GEHR PC/ABS®:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fil-A-Gehr datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 其它性能 - 3D Data
Any use of this information falls under the rules of our disclaimer.
材料文字说明
To determine the FIL-A-GEHR PC/ABS® data, ISO 527 tensile test speciment were printed on a EVOTECH printer with the following parameters: TPrint 280°C, TBed 90°C, Printing speed 55 mm/s, Slicer Simplify3D
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 18[1] cm³/10min ISO 1133
温度 260 °C -
载荷 5 kg -
1: Data based on raw material
机械性能价值单位Test Standard
ISO数据
拉伸模量 2400[2] MPa ISO 527
屈服应力 54[2] MPa ISO 527
2: Data based on raw material
其它性能价值单位Test Standard
吸水性 0.7[3] % 类似ISO 62
密度 1130[3] kg/m³ ISO 1183
3: Data based on raw material
3D Data价值单位Test Standard
拉伸模量, flat 2240 MPa -
拉伸模量, upright 2350 MPa -
拉伸强度, flat 44.7 MPa -
拉伸强度, upright 18.3 MPa -
典型数据
加工方法
Additive Manufacturing
供货形式
单纤纺丝, 黑色
特殊性能
高冲击韧性的/经抗冲改性的
特征
好粘附性能, 少气味, 低翘曲
应用
汽车, 电子电气
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.