Material datasheets available free. Online registration at: www.materialdatacenter.com
Creamid - PA6, PA66 - Teknor Apex Company
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Creamid" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
... as PEEK and PPS or thermosets. The LKT performed numerous tests on radiation-crosslinked PA 66 gear wheels in collaboration with BGS. Polyamide 66 (Ultramid A3 from BASF) was predominantly used for the studies. A heatstabilized PA 66 (Creamid A3H2 from PTS) was additionally used for the tribological comparison. The studies were performed on plates with dimensions 110 × 110 × 4mm3. In addition, the mold temperatures were varied to produce strongly quasi-amorphous edge layers. The radiation cause...
Kunststoffe international, 2012-11-26, Some Like it Hot
...tly irradiation cross-linked to give it a very good resistance to heat aging up to 220°C, while at the same time satisfying all the demands on resistance to hydrolysis and chemicals. Heat Aging and Media Resistance New hot air stabilizers enabled V-Creamid-A3H7.2G7 (PA66GF35 – heat-stabilized, radiation curable) and VCreamid-A3H7.3G7 (PA66GF35 – heatstabilized – PTS shielding technology, radiation curable) to be developed, two new PAGF compounds which in combination with radiation curing retain ...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.