Material datasheets available free. Online registration at: www.materialdatacenter.com
Simona - TPO - Simona AG
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Simona" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...5°; γR = 25°; - Stator knife: αS = 5°, βS = 90°; γS = - 5°; - Cutting edge radius r = 0.01 mm; knife clearance s = 0.3 mm; - Parallel cut with holding-down clamp - Material: extruded PP sheets (PP DWU from Simona AG, Kirn/Germany) with rectangular cross-section, thickness d = 5 mm; width b = 10 mm For these studies, the free rotor knife angle was set as 10°, and in the basic condition the rotor knife angle was 55°. The knife edge radius was chos...
Kunststoffe international, 2005-11-21, The Right Speed
...hat simulates rotor shears (Fig.2b). Unlike the test set-up illustrated in (a), the comminution of the plastic takes place in the radial and axial gap of the U-shaped stator. The material used for both sets of tests was polypropylene (PP-DWU, Simona AG/Kirn) with wall thicknesses of 2 and 5mm. Examination of the Ideal Stress The model comminution apparatus consists of a rotor which, at low speeds, is driven hydraulically and, at speeds above 1m/s, by means of a servo motor. The rotor has an in...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.