Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Lupolen 4261 AG - (PE-HD) - LyondellBasell Industries

Material Data Center offers the following functions for Lupolen 4261 AG:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lupolen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 6 g/10min ISO 1133
Temperatura 190 °C -
Carga 21.6 kg -
ASTM Dados
Índice de fluidez, MFI 6 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 21.6 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 900 MPa ISO 527
Tensão no escoamento 24 MPa ISO 527
Deformação no escoamento 10 % ISO 527
Módulo de flexão, 23°C 1100 MPa ISO 178
ASTM Dados
Resistência à tração no escoamento 23.1 MPa ASTM D 638
Deformação na ruptura 600 % ASTM D 638
Módulo de flexão 1070 MPa ASTM D 790
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 131 °C ISO 11357-1/-3
Temperatura de amolecimento Vicat , A 126 °C ISO 306
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 945 kg/m³ ISO 1183
Bulk density 500 kg/m³ -
Densidade 945 kg/m³ ASTM D 792
Recomendação de processamento ExtrusãoValorUnidadeMétodo de ensaio
Temperatura da massa 180 - 240 °C -
Características
Processamento
Outros tipos de extrusão, Moldagem por sopro, Termoformagem
Forma de entrega
Granulos
Características especiais
Alto impacto.
Resistência Química
Resistência química geral, Resistência ao stress cracking, Resistência à oxidação
Aplicaciones
Automóvel
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.