Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® 1154 D FHF - (TPU-ARET) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Diagrama

Any use of this information falls under the rules of our disclaimer.

Informação do produto

DESCRIPTION
Elastollan 1154 D FHF is a halogen free, flame retarded polyether based TPU

SPECIAL PROPERTIES
excellent resistance to hydrolysis and good flexibility at low temperature,
resistance to microbiological attack, good wear performance,
high tensile strength, good damping behavior

TYPICAL APPLICATIONS
cable sheathing, hoses, profiles

OTHER HINTS
predrying: 2-3h at 100-110°C,
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

Propriedades mecânicas	Valor	Unidade	Método de ensaio
ISO Dados
Módulo de tração	160	MPa	ISO 527
Res. impacto Charpy c/entalhe, +23°C	50	kJ/m²	ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C	3	kJ/m²	ISO 179/1eA
Tensão em 100% de alongamento	19	MPa	ISO 527
Tensão em 300% de alongamento	33	MPa	ISO 527
Tensão na Ruptura TPE	30	MPa	ISO 527
Deformação na Ruptura TPE	>300	%	ISO 527
Deformação permanente por compressão a 23°C, 24h	30	%	ISO 815
Deformação permanente por compressão a 70°C, 24h	45	%	ISO 815
Resistência ao rasgamento	110	kN/m	ISO 34-1
Resistência à abrasão	40	mm³	ISO 4649
Dureza Shore D	55	-	ISO 7619-1

Propriedades térmicas	Valor	Unidade	Método de ensaio
ISO Dados
Flamabilidade a 1.5mm esp. nom.	V-0	class	IEC 60695-11-10
Cartão Amarelo (yellow card) disponível	sim	-	-
Flamabilidade a espessura h	V-0	class	IEC 60695-11-10
Espessuras do tubo de teste	3.0	mm	-
Cartão Amarelo (yellow card) disponível	sim	-	-

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1270	kg/m³	ISO 1183

Diagrama

Características

Processamento

Moldagem por injeção, Extrusão de perfis

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.