Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® LX9112 BK - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® LX9112 BK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Conductive, heat-stabilized and light-resistant polyamide 12 compound for the extrusion coating of steel tubing

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound, especially developed for the pore-free extrusion coating of steel tubing.
 
Compared to commonly use conductive extrusion compounds VESTAMID® LX9112 BK is distinguished by a significant lower melt viscosity and respectively by outstanding extrusion characteristics even in very thin coatings.
 
Steel tubing coated with VESTAMID® LX9112 BK meet the requirements of the US automotive industry to prevent electrostatic charge caused by flowing liquid fuels.

Due to the excellent impact strength and the  good abrasion and chemical resistance of polyamide 12 the seamless coating with VESTAMID® LX9112 BK improves the corrosion resistance of steel tubing significantly.
 
VESTAMID® LX9112 BK is supplied as cylindrical pellets, ready for processing in moisture-proof packaging.


Pigmentation may affect values.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM

Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 34 / * cm³/10min ISO 1133
温度 240 / * °C -
荷重 10 / * kg -
成形収縮率, 平行 1.2 / * % ISO 294-4, 2577
成形収縮率, 直角 1.5 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 2120 / 1690 MPa ISO 527
降伏応力 54 / 48 MPa ISO 527
降伏ひずみ 4 / 13 % ISO 527
破壊呼びひずみ 32 / >50 % ISO 527
シャルピー衝撃強さ, +23°C N / N kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C N / N kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 4 / 3 kJ/m² ISO 179/1eA
Type of failure C / C - -
ノッチ付きシャルピー衝撃強さ, -30°C 3 / 3 kJ/m² ISO 179/1eA
Type of failure C / C - -
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 176 / * °C ISO 11357-1/-3
ガラス転移点, 10°C/min 44 / * °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 52 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 150 / * °C ISO 75-1/-2
ビカット軟化温度, B 156 / * °C ISO 306
線膨張係数, 平行 105 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 124 / * E-6/K ISO 11359-1/-2
電気的特性.乾燥/調湿単位テスト基準
ISO データ
体積抵抗率 43000 / 29000 Ohm*m IEC 62631-3-1
その他の特性.乾燥/調湿単位テスト基準
吸水率 1.11 / * % Sim. to ISO 62
吸湿率 0.65 / * % Sim. to ISO 62
密度 1120 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
その他の押出成形., コーティング.
納入形状.
ペレット., 黒
特殊な特性.
導電., 帯電防止., 高耐衝撃及び耐衝撃改良., 光安定化., 熱安定化.
耐薬品性
General Chemical Resistance
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.