Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tenite™ Butyrate 264A3720013 - CAB - Eastman Chemical Co.

Material Data Center offers the following functions for Tenite™ Butyrate 264A3720013:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tenite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - 光学特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite™ cellulosic plastics are available in natural, clear, selected ambers, or smoke transparents and black translucent.

Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Butyrate 264-13 has a plasticizer level of 13%.




Processing/Physical Characteristics値単位テスト基準
ASTM数据
成形収縮率., 平行 0.004 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
降伏応力 29 MPa ASTM D 638
破壊応力 39.3 MPa ASTM D 638
破断伸び 50 % ASTM D 638
曲げ弾性率 1241 MPa ASTM D 790
ロックウェル硬度 R 59 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 283 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 101 J/m ASTM D 256
温度 -40 °C -
熱的特性値単位テスト基準
ASTM数据
線膨張係数, 平行 140 E-6/K ASTM D 696
DTUL @ 66 psi 81 °C ASTM D 648
DTUL @ 264 psi 69 °C ASTM D 648
ビカット軟化温度 100 °C ASTM D 1525
熱伝導率, ソリッド 0.036 W/(m K) ASTM C 177
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 15.3 kV/mm ASTM D 149
誘電正接, 1 MHz 0.08 - ASTM D 150
比誘電率, 1 MHz 3.55 - ASTM D 150
体積抵抗率 1E15 Ohm*cm ASTM D 257
光学特性値単位テスト基準
ASTM数据
ヘイズ 8.5 % ASTM D 1003
くっせつりつ 1.48 - ASTM D 542
その他の特性.値単位テスト基準
吸水率, 24hr 1.4 % ASTM D 570
密度 1180 kg/m³ ASTM D 792
特殊な特性
添加剤.
可塑剤.
特殊な特性.
透明.
な特性
High Gloss
Certifications
Contains renewable resources
アプリケーション
スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.