Remak - PP - SPS（GUANGZHOU）LIMITED

Kunststoffe international, 2006-04-25, Process Automation: Machining Cell for Injection Moulded Plastic Containers
... individual containers will have been in intermediate storage for different periods of time and will thus have shrunk to differing extents. To overcome these limitations, the new concept includes a robot manufacturing cell (Fig. 1), set up by Remak Maschinenbau GmbH, Reinheim/Germany. The centrepiece of this cell is a KR 60-3 HA articulated arm robot (manufacturer: Kuka Roboter GmbH, Augsburg/Germany). This is mounted, along with a rotary table, on a solid base plate which is a feature of all R...

Kunststoffe international, 2006-09-28, Development Trends in Automation: Robots and Humans: A Good Team
...e cycle time, and almost always help to generate a program sequence that is less stressful to the material. An example is the premature introduction of the robot arm into the opening injection mould. Remak applied for a patent for its MCS (mould chasing system) process for linear robots as long ago as 1997 and, together with Kuka, markets it as a standard product, including for swan-neck robots, under the trade name Plastech. The self-optimising program also includes extension of the handling sy...

Kunststoffe international, 2007-04-17, Dual Head in the Drilling Cell
...on holes are needed for applying the laminating material, e.g. a decorative film with leather grain, accurately in the mould in order that exact reproduction of the part contour may be achieved. The robot working in the drilling cell RBZ-2H (design: Remak Maschinenbau GmbH, Reinheim/Germany) has just 50 seconds to make the holes. In practice, this means that the installation has to make up to 46,000 holes continuously per 8-hour shift on three-dimensional workpieces measuring approximately 0.5m2...

Kunststoffe international, 2007-09-19, Plastics and Robotics Take Off
... remotely with the customer’s plant. They can identify faults or recognize problems in the early stages and take countermeasures. That gives customers a higher availability of their robot systems and they also benefit from shorter repair times. Remak Maschinenbau GmbH, Reinheim, Germany, shows the MasterCell FlexCheck robot cells with a Fanuc robot, which was designed for various testing functions (Fig.4). In the manufacturing cell, a cutting operation with following inline quality monitoring is...

Kunststoffe international, 2007-09-19, Several Irons in the Fire
...ls on mold exchange and permanent monitoring of the return temperature are standard features. Process control and documentation are facilitated by an optional interface to the machine and pressure and flow monitoring. Remak Maschinenbau GmbH, Reinheim, Germany, has expanded its compact PulseTemp RPT 100 system with an "automatic" mode (Fig.14). Without further choice of the operating mode, only the temperature setpoints for the individual cooling circuits need to be entered. The control ...

Kunststoffe international, 2008-09-23, Growing Up while Remaining Small
...nted decorative film into the mold and holds it in a precise orientation with the aid of a clamping frame was supplied completely by Leonhard Kurz GmbH & Co. KG, Fuerth, Germany. The finished cell phone shells were removed by a linear robot from Remak Maschinenbau GmbH, Reinheim, Germany. Boy promotes one of its strengths as overmolding of metal inserts. The “Open House” demonstrated this by means of two applications: in the first, hexagonal pins were overmolded fully automatic...