Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin APS130 - (PPE+PPS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin APS130:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL GTX™ APS130 resin is a 30% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyphenylene Sulfide (PPS). This injection moldable grade has high stiffness, excellent chemical resistance, and high heat resistance. NORYL GTX APS130 resin is an excellent candidate for automotive under-the-hood applications such as ignition systems and electrical components.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 29.1 g/10min ASTM D 1238
温度 300 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 6640 MPa ISO 527
破壊応力 120 MPa ISO 527
破壊ひずみ 1.5 % ISO 527
曲げ弾性率 8110 MPa ISO 178
シャルピー衝撃強さ, +23°C 59 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 22 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, -30ﾟC 6 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, +23°C, 3mm 21 kJ/m² ISO 179/1eA
ASTM数据
曲げ弾性率 8430 MPa ASTM D 790
曲げ強さ 156 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 88 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 0.45 MPa 264 °C ISO 75-1/-2
ASTM数据
DTUL @ 66 psi 267 °C ASTM D 648
電気的特性.値単位テスト基準
ISO データ
耐トラッキング性 150 - IEC 60112
ASTM数据
耐電圧, 短い時間 22.1 kV/mm ASTM D 149
比誘電率, 60 Hz 3.3 - ASTM D 150
表面抵抗率 1E16 Ohm ASTM D 257
体積抵抗率 1.2E17 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
密度. 1440 kg/m³ ISO 1183
吸水率, 24hr 0.02 % ASTM D 570
密度 1440 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 - 150 °C -
Pre-drying - Time 4 - 8 h -
Processing humidity ≤0.02 % -
樹脂温度 300 - 330 °C -
金型温度 95 - 150 °C -
Zone 1 280 - 315 °C -
Zone 2 290 - 320 °C -
Zone 3 295 - 330 °C -
Screw speed 50 - 100 rpm -
Back pressure 0.7 - 1.4 MPa -
特殊な特性
成形加工法.
射出成形.
アプリケーション
自動車
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.