Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin GFN1F - Americas - (PPE+PS)-GF10 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin GFN1F - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL™ GFN1F resin is a 10% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade exhibits very low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability. NORYL GFN1F carries a UL746C outdoor suitability rating of F1 along with FDA food contact compliance and NSF 61 listings in several colors. The properties of this material makes it an excellent candidate for water management applications such as water filter and meter components, pump housings / impellers, shower + faucet, and valves.*See NORYL GFN1 resin for NON FDA / NSF version.

UL Yellow Card Link E121562-221234
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 16 cm³/10min ISO 1133
温度 300 °C -
荷重 5 kg -
ASTM数据
メルトフローレイト, MFI 16.6 g/10min ASTM D 1238
温度 300 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 4400 MPa ISO 527
破壊応力 64 MPa ISO 527
破壊ひずみ 3 % ISO 527
曲げ弾性率 4160 MPa ISO 178
曲げ強さ 122 MPa ISO 178
シャルピー衝撃強さ, +23°C 34 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 33 kJ/m² ISO 179/1eU
Izod impact strength, +23°C, 4mm 27 kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm 25 kJ/m² ISO 180/1U
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 10 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm 9 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 4350 MPa ASTM D 638
破壊応力 63 MPa ASTM D 638
破断伸び 3 % ASTM D 638
曲げ弾性率 3840 MPa ASTM D 790
ロックウェル硬度 L104 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 118 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 103 J/m ASTM D 256
温度 -30 °C -
アイゾット衝撃試験, 1/8 in 449 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, B 131 °C ISO 306
ビカット軟化温度, 120°C/h 50N 134 °C ISO 306
1.5mm厚さでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 1.5 mm -
ASTM数据
DTUL @ 66 psi 131 °C ASTM D 648
DTUL @ 264 psi 122 °C ASTM D 648
電気的特性.値単位テスト基準
ASTM数据
誘電正接, 1 MHz 0.0014 - ASTM D 150
比誘電率, 1 MHz 2.9 - ASTM D 150
その他の特性.値単位テスト基準
密度 1130 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 105 - 110 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 295 - 315 °C -
金型温度 75 - 105 °C -
Zone 1 260 - 305 °C -
Zone 2 270 - 310 °C -
Zone 3 280 - 315 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
耐薬品性
Hydrolytically Stable
Certifications
Food contact, Food approval FDA 21 CFR
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.