Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Neostar™ Elastomer FN005 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Neostar™ Elastomer FN005:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Neostar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 光学特性 - その他の特性. - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
商品の説明文

Eastman Neostar™ Elastomer FN005 is a tough, clear, durable, general purpose grade copolyester ether. It was designed for use in the profile and automotive markets, but is also used in packaging and tubing applications where toughness and flex-crack resistance are required. Eastman Neostar™ Elastomer FN005 can be used in injection molding and cast film or tubing extrusion applications or in any application that demands strength, durability, and puncture resistance in harsh environments. This copolyester combines toughness, clarity, and flexibility without the addition of plasticizers. Eastman Neostar™ Elastomer FN005 is considered environmentally preferred because of its non-halogenated material composition. The target inherent viscosity of this product is 1.05.




Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 20 g/10min ASTM D 1238
温度 230 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ASTM数据
引張弾性率 170 MPa ASTM D 638
降伏応力 14 MPa ASTM D 638
破壊応力 20 MPa ASTM D 638
降伏点伸び 30 % ASTM D 638
破断伸び 300 % ASTM D 638
曲げ弾性率 150 MPa ASTM D 790
ショア硬さA 95 - ASTM D 2240
ショア硬さD 55 - ASTM D 2240
ノッチ付きIzod衝撃強さ, Low-Temperature 50 J/m ASTM D 256
温度 -40 °C -
熱的特性値単位テスト基準
ASTM数据
線膨張係数, 平行 150 E-6/K ASTM D 696
溶融温度 207 °C ASTM D 3418
ガラス転移温度 -40 °C ASTM E 1356
ビカット軟化温度 170 °C ASTM D 1525
熱伝導率, ソリッド 0.0274 W/(m K) ASTM C 177
光学特性値単位テスト基準
ASTM数据
光沢度 80 - ASTM D 2457
ヘイズ 1 % ASTM D 1003
視感透過率 93 % ASTM D 1003
くっせつりつ 1.51 - ASTM D 542
その他の特性.値単位テスト基準
吸水率, 24hr 0.35 % ASTM D 570
密度 1130 kg/m³ ASTM D 792
機械的特性(ィルム)値単位テスト基準
ASTM Data
引張弾性率, 平行 185 MPa ASTM D 882
引張弾性率, 直角 179 MPa ASTM D 882
降伏応力, 平行 13.7 MPa ASTM D 882
降伏応力, 直角 13.5 MPa ASTM D 882
破壊応力, 平行 23.7 MPa ASTM D 882
破壊応力, 直角 22.6 MPa ASTM D 882
降伏点伸び, 平行 26 % ASTM D 882
降伏点伸び, 直角 26 % ASTM D 882
破断伸び, 平行 550 % ASTM D 882
破断伸び, 直角 550 % ASTM D 882
試験片の厚さ 0.13 mm -
特殊な特性
成形加工法.
射出成形., フィルム押出成形., Pipe/Tube Extrusion, 異形押出成形.
特殊な特性.
熱安定化., 透明.
な特性
Copolymer
耐薬品性
General Chemical Resistance
アプリケーション
自動車, パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.