Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 値 | 単位 | テスト基準 |
ASTM数据 |
メルトフローレイト, MFI |
2 |
g/10min |
ASTM D 1238 |
温度 |
190 |
°C |
- |
荷重 |
2.16 |
kg |
- |
機械的特性 | 値 | 単位 | テスト基準 |
Other Standards[S] |
パンクチャー衝撃-最大応力, +23゚C |
25 |
N |
ASTM D 5748 |
パンクチャー衝撃エネルギー, +23゚C |
1.6 |
J |
ASTM D 5748 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
熱的特性 | 値 | 単位 | テスト基準 |
ASTM数据 |
溶融温度 |
121 |
°C |
ASTM D 3418 |
ビカット軟化温度 |
100 |
°C |
ASTM D 1525 |
光学特性 | 値 | 単位 | テスト基準 |
ASTM数据 |
光沢度 |
92 |
- |
ASTM D 2457 |
ヘイズ |
1.8 |
% |
ASTM D 1003 |
その他の特性. | 値 | 単位 | テスト基準 |
密度 |
918 |
kg/m³ |
ASTM D 792 |
機械的特性(ィルム) | 値 | 単位 | テスト基準 |
ASTM Data |
降伏応力, 平行 |
9.7 |
MPa |
ASTM D 882 |
降伏応力, 直角 |
9.6 |
MPa |
ASTM D 882 |
破壊応力, 平行 |
37 |
MPa |
ASTM D 882 |
破壊応力, 直角 |
23 |
MPa |
ASTM D 882 |
破断伸び, 平行 |
330 |
% |
ASTM D 882 |
破断伸び, 直角 |
670 |
% |
ASTM D 882 |
押出成形のタイプ |
cast |
- |
- |
試験片の厚さ |
0.02 |
mm |
- |
Processing Recommendation Extrusion | 値 | 単位 | テスト基準 |
樹脂温度 |
220 - 250 |
°C |
- |
Zone 1 |
180 - 270 |
°C |
- |
特殊な特性
成形加工法.
フィルム押出成形.
な特性
Blending Resin, Thermal Stability
Certifications
Food contact
アプリケーション
パッケージング
領域別の利用可能性
近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com