Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ EXL Filament AMHI240F Black - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ EXL Filament AMHI240F Black:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
その他の特性. - 3D Data
Any use of this information falls under the rules of our disclaimer.
商品の説明文
LEXAN™ EXL AMHI240F filament is a high impact polycarbonate product available in black and white colors. It provides high impact strength and improved ductility over standard polycarbonate at room temperature and extreme low temperatures.
その他の特性.値単位テスト基準
密度 1190 kg/m³ ASTM D 792
3D Data値単位テスト基準
Other Standards[S]
引張弾性率, flat 1730 MPa ASTM D 638
引張弾性率, on-edge 1910 MPa ASTM D 638
引張弾性率, upright 1800 MPa ASTM D 638
破壊応力, flat 45 MPa ASTM D 638
破壊応力, on-edge 55 MPa ASTM D 638
破壊応力, upright 40 MPa ASTM D 638
破壊ひずみ, flat 7 % ASTM D 638
破壊ひずみ, on-edge 5 % ASTM D 638
破壊ひずみ, upright 3 % ASTM D 638
曲げ弾性率, flat 1530 MPa ASTM D 790
曲げ弾性率, on-edge 1910 MPa ASTM D 790
曲げ弾性率, upright 1500 MPa ASTM D 790
シャルピー衝撃強さ, +23°C, flat 88 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, +23°C, on-edge 151 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, +23°C, upright 23 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C, flat 19 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, +23°C, on-edge 30 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, +23°C, upright 6 kJ/m² ISO 179/1eA
荷重たわみ温度, 1.80 MPa, flat 139 °C ASTM D 6484
荷重たわみ温度, 1.80 MPa, on-edge 138 °C ASTM D 6484
荷重たわみ温度, 1.80 MPa, upright 138 °C ASTM D 6484
ビカット軟化温度, A, flat 148 °C ASTM D 1525
ビカット軟化温度, A, on-edge 149 °C ASTM D 1525
ビカット軟化温度, A, upright 149 °C ASTM D 1525
線膨張係数, 平行, flat 77 E-6/K ASTM E 831
線膨張係数, 平行, on-edge 80 E-6/K ASTM E 831
線膨張係数, 平行, upright 79 E-6/K ASTM E 831
線膨張係数, 直角, flat 77 E-6/K ASTM E 831
線膨張係数, 直角, on-edge 81 E-6/K ASTM E 831
線膨張係数, 直角, upright 79 E-6/K ASTM E 831
厚さhでの燃焼性, flat V-0 class UL 94
厚さhでの燃焼性, on-edge V-0 class UL 94
厚さhでの燃焼性, upright V-2 class UL 94
試験片の厚さ 3.0 mm UL 94
体積抵抗率, flat 1.4E13 Ohm*m ASTM D 257
体積抵抗率, on-edge 1.5E13 Ohm*m ASTM D 257
体積抵抗率, upright 1.5E13 Ohm*m ASTM D 257
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament, 黒
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
Ductile
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.