Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 9370A GMP - TPU - Covestro Deutschland AG

Material Data Center offers the following functions for Desmopan 9370A GMP:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - その他の特性. - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
商品の説明文
  • Extrusion- and injection molding grade
  • with special UV stabilizers
  • very good hydrolysis and microbial resistance
  • good low-temperature flexibility
  • free from plasticizers
  • high moisture vapor transmission rate
    Application:
  • breathable films
  • Films
  • Sports shoe soles
  • hard - soft systems
機械的特性値単位テスト基準
ISO データ
伸び率10%時の応力 0.6 MPa ISO 527
伸び率100%時の応力 2.9 MPa ISO 527
伸び率300%時の応力 5 MPa ISO 527
破壊応力 TPE 26 MPa ISO 527
破壊ひずみ TPE >300 % ISO 527
引張強度 25.7 MPa ISO 37
破壊ひずみ 738 % ISO 37
圧縮永久ひずみ 70℃, 24h 49 % ISO 815
引裂強さ 40 kN/m ISO 34-1
耐摩耗性 70 mm³ ISO 4649
ショア硬さA 70 - ISO 7619-1
その他の特性.値単位テスト基準
密度 1060 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
樹脂温度 190 - 210 °C -
金型温度 20 - 40 °C -
Processing Recommendation Extrusion値単位テスト基準
樹脂温度 175 - 210 °C -
特殊な特性
成形加工法.
射出成形., フィルム押出成形., その他の押出成形.
耐薬品性
Hydrolytically Stable
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR, Drinking water contact, Drinking water contact DVGW W270
アプリケーション
スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
その他の情報
村遜速揃
PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 80 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 190-210 °C
Mold temperature: 20-40 °C
その他の押出成形.

 Preprocessing

Max. Water content ≤0.05 %
Drying temperature 70-110 °C
Dry air dryer 1-2 h

 Processing

Melt temperature 175-210 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.