Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® 510GR NC000 - POM-GF10 - DuPont Engineering Polymers

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® 510GR is a 10% glass-reinforced acetal homopolymer for injection molding.  It has high strength, stiffness, and high deflection temperature and excellent creep resistance.

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	12	cm³/10min	ISO 1133
温度	190	°C	-
荷重	2.16	kg	-
成形収縮率, 平行	1.0	%	ISO 294-4, 2577
成形収縮率, 直角	1.4	%	ISO 294-4, 2577
ASTM数据
メルトフローレイト, MFI	7	g/10min	ASTM D 1238
成形収縮率., 平行	0.01	mm/mm	ASTM D 955
成形収縮率, 直角	0.0135	mm/mm	ASTM D 955

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	5500	MPa	ISO 527
破壊応力	105	MPa	ISO 527
破壊ひずみ	3.7	%	ISO 527
引張クリープ弾性率, 1h	4800	MPa	ISO 899-1
引張クリープ弾性率, 1000h	3500	MPa	ISO 899-1
シャルピー衝撃強さ, +23°C	50	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	50	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	6.5	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	5	kJ/m²	ISO 179/1eA
ASTM数据
引張弾性率	6100	MPa	ASTM D 638
引張強度	100	MPa	ASTM D 638
破断伸び	5	%	ASTM D 638
曲げ弾性率	4300	MPa	ASTM D 790
ロックウェル硬度	R 119	-	ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in	53	J/m	ASTM D 256

熱的特性	値	単位	テスト基準
ISO データ
溶融温度, 10°C/min	178	°C	ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa	164	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	174	°C	ISO 75-1/-2
ビカット軟化温度, B	160	°C	ISO 306
線膨張係数, 平行	70	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	100	E-6/K	ISO 11359-1/-2
厚さhでの燃焼性	HB	class	IEC 60695-11-10
試験片の厚さ	0.8	mm	-
Yellow Card 可用	はい	-	-
ASTM数据
UL94 燃焼性	HB	-	UL 94
追加試験片の厚さ	0.75	mm	-
線膨張係数, 平行	70	E-6/K	ASTM D 696
線膨張係数, 直角	100	E-6/K	ASTM D 696
DTUL @ 66 psi	176	°C	ASTM D 648
DTUL @ 264 psi	170	°C	ASTM D 648
溶融温度	178	°C	ASTM D 3418

電気的特性.	値	単位	テスト基準
ISO データ
比誘電率, 100Hz	3.7	-	IEC 62631-2-1
比誘電率, 1MHz	3.9	-	IEC 62631-2-1
体積抵抗率	1E11	Ohm*m	IEC 62631-3-1
耐トラッキング性	600	-	IEC 60112

その他の特性.	値	単位	テスト基準
吸水率	1.1	%	Sim. to ISO 62
吸湿率	0.16	%	Sim. to ISO 62
密度	1490	kg/m³	ISO 1183
密度	1470	kg/m³	ASTM D 792

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット., ナチュラルカラー

添加剤.

離型剤.

な特性

Creep Resistance, Fatigue Resistance, Homopolymer

領域別の利用可能性

北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ

その他の情報

村遜速揃

Drying is recommended, but not necessary for newly opened packaging stored in a dry location.

Follow the drying guidelines above in the following cases:

·         If moisture is above the Processing Moisture Content recommendation,

·         When a resin container is damaged,

·         When the material is not properly stored in a dry place at room temperature, or

·         When packaging stays open for a significant time.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.