Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of APTIV® 1000-050G - PEEK - Victrex plc

Material Data Center offers the following functions for APTIV® 1000-050G:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Aptiv datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 熱的特性 - 電気的特性. - その他の特性. - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Easy to process – can be laminated to other materials, thermoformed, metallised, coated, printed, stamped and die cut, welded and heat sealed. APTIV 1000 acts an excellent electrical insulator across a wide range of temperatures and electrical frequencies.
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0.5 % ISO 294-4, 2577
成形収縮率, 直角 0.5 % ISO 294-4, 2577
熱的特性値単位テスト基準
ASTM数据
線膨張係数, 平行 47 E-6/K ASTM D 696
電気的特性.値単位テスト基準
ASTM数据
耐電圧, 短い時間 190[1] kV/mm ASTM D 149
体積抵抗率 4E16 Ohm*cm ASTM D 257
1: 50 μm
その他の特性.値単位テスト基準
吸湿率 0.04 % Sim. to ISO 62
密度. 1300 kg/m³ ISO 1183
機械的特性(ィルム)値単位テスト基準
ISO データ
引張弾性率, 平行 2500 MPa ISO 527-3
引張弾性率, 直角 2500 MPa ISO 527-3
破壊応力, 平行 130 MPa ISO 527-3
破壊応力, 直角 120 MPa ISO 527-3
最大ひずみ, 平行 150 % ISO 527-3
最大ひずみ, 直角 150 % ISO 527-3
トラウザー引裂抵抗, 平行 6 N/mm ISO 6383-1
トラウザー引裂抵抗, 直角 8 N/mm ISO 6383-1
試験片の厚さ. 0.05 mm -
特殊な特性
成形加工法.
フィルム押出成形., コーティング., 熱成形.
納入形状.
Semifinished product, Film
特殊な特性.
難燃., Halogen-free, 熱安定化.
な特性
Acoustical Barrier Properties, Barrier Properties, Good Adhesion, Heat Sealable, Laser Markable, Low Emission, Low Smoke, Tribologic Grade, Weldable
耐薬品性
General Chemical Resistance, Hydrolytically Stable, Radiation Resistance
Certifications
Food contact, Food approval 1935/2004/EC, Food approval FDA 21 CFR, RoHS
アプリケーション
航空宇宙, 電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.