Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Antero™ 840CN03 - PEKK-Z3 - Stratasys Ltd.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Antero datasheets, application examples or technical articles are available in Material Data Center
熱的特性 | 値 | 単位 | テスト基準 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DTUL @ 66 psi | 150 | °C | ASTM D 648 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DTUL @ 264 psi | 153 | °C | ASTM D 648 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Other Standards[S] | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
線膨張係数, 平行 | 50.4 | E-6/K | ASTM E 831 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ガラス転移温度 | 158 | °C | ASTM D 7426 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
その他の特性. | 値 | 単位 | テスト基準 |
密度 | 1270 | kg/m³ | ASTM D 792 |
3D Data | 値 | 単位 | テスト基準 |
引張弾性率, on-edge | 3170[1] | MPa | - |
引張弾性率, upright | 3010[2] | MPa | - |
破壊応力, on-edge | 65[1] | MPa | - |
破壊応力, upright | 50[2] | MPa | - |
破壊ひずみ, on-edge | 6[1] | % | - |
破壊ひずみ, upright | 1.8[2] | % | - |
曲げ弾性率, on-edge | 3240[3] | MPa | - |
曲げ弾性率, upright | 2700[4] | MPa | - |
1: | XZ-direction; reference to ASTM D638 | 2: | ZX-direction; reference to ASTM D638 | 3: | XZ-direction; reference to ASTM D790 | 4: | ZX-direction; reference to ASTM D790 |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.