Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ubesta 3035 LU 1 - PA12 - UBE

Material Data Center offers the following functions for Ubesta 3035 LU 1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ubesta datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caratteristiche FisicheValoreUnitáNorma del test
ISO Data
Indice di Fluiditá, MFI 1 g/10min ISO 1133
Temperatura 235 °C -
Carico 2.16 kg -
Ritiro di stampaggio, parallelo 0.7 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.5 % ISO 294-4, 2577
ASTM Data
Indice di fluidità a caldo, MFI 1.3 g/10min ASTM D 1238
Temperatura 235 °C -
Carico 2.16 kg -
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico unitario a trazione 50 MPa ISO 527
Deformazione a snervamento 4 % ISO 527
Deformazione a rottura >50 % ISO 527
Modulo a flessione, 23°C 1500 MPa ISO 178
Resist. urto Charpy con intaglio, +23°C 20 kJ/m² ISO 179/1eA
Durezza Shore D 79 - ISO 7619-1
Durezza Rockwell R 107 - ISO 2039-2
ASTM Data
Resistenza alla trazione di snervamento 46 MPa ASTM D 638
Resistenza alla trazione a rottura 56 MPa ASTM D 638
Allungamento a rottura 250 % ASTM D 638
Modulo a flessione 1590 MPa ASTM D 790
Resistenza alla flessione 61 MPa ASTM D 790
Durezza Rockwell R 112 - ASTM D 785
Resistenza all'urto Izod con intaglio, 1/8 in 86.5 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 178 °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 45 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 105 °C ISO 75-1/-2
Coeff.di dilatazione termica lin., parallelo 120 E-6/K ISO 11359-1/-2
ASTM Data
DTUL a 66 psi 149 °C ASTM D 648
Temperatura di fusione 178 °C ASTM D 3418
Proprietà ElettricheValoreUnitáNorma del test
ISO Data
Resistività volumica 1E12 Ohm*m IEC 62631-3-1
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1020 kg/m³ ISO 1183
Densità 1020 kg/m³ ASTM D 792
Caratteristiche
Processabilità e Forma di Forni
Altre Estrusioni, Rivestimento
Forma fisica disponibile
Nero
Caratteristiche speciali
Stabilizzato o stabile al calore
Disponibilità geografica
Nord America, Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.