Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pyramid™ CC100 - PEEK-Z60 - Polymics, Ltd.

Material Data Center offers the following functions for Pyramid™ CC100:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Pyramid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto

PEEK with 60% Chopped Carbon Fabric/Tape.


Pyramid CC100 is chopped carbon fiber (1/4” or so to 1/2”) reinforced, feed

material can be in fiber bundles, chopped tapes or other irregular chopped fiber

forms. Typically used as reinforced structural components such as medical

Instruments.

Proprietà MeccanicheValoreUnitáNorma del test
ASTM Data
Modulo a trazione 36000 MPa ASTM D 638
Resistenza alla trazione a rottura 310 MPa ASTM D 638
Allungamento a rottura 1 % ASTM D 638
Modulo alla compressione 25000 MPa ASTM D 695
Resistenza a compressione 275 MPa ASTM D 695
Modulo a flessione 34000 MPa ASTM D 790
Durezza Rockwell M 110 - ASTM D 785
Durezza D Shore 96 - ASTM D 2240
Resistenza all'urto Izod con intaglio, 1/8 in 110 J/m ASTM D 256
Proprietà TermicheValoreUnitáNorma del test
ASTM Data
UL 94 combustibilitá V-0 - UL 94
DTUL a 264 psi 300 °C ASTM D 648
Temperatura di fusione 340 °C ASTM D 3418
Temperatura di transizione vetrosa 143 °C ASTM E 1356
Proprietà ElettricheValoreUnitáNorma del test
ASTM Data
Resistenza superficiale 100 Ohm ASTM D 257
Resistenza di volume 100 Ohm*cm ASTM D 257
Altre ProprietàValoreUnitáNorma del test
Assorbimento d’acqua, 24hr 0.05 % ASTM D 570
Densità 1500 kg/m³ ASTM D 792
Caratteristiche
Forma fisica disponibile
Nero
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.