Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Monprene® CP-18250 - TPE - Teknor Apex Co.

Material Data Center offers the following functions for Monprene® CP-18250:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Altre Proprietà - Raccomandazione de Processabilità Stampaggio ad Iniezione
Any use of this information falls under the rules of our disclaimer.
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Deformazione residua dopo compressione a 23°C, 24h 24 % ISO 815
Deformazione residua dopo compressione a 70°C, 24h 44 % ISO 815
ASTM Data
Modulo a 100% allungamento 1.4 MPa ASTM D 412
Modulo a 300% allungamento 0.67 MPa ASTM D 412
Durezza A Shore 50 - ASTM D 2240
Resistenza alla trazione a rottura 7.5 MPa ASTM D 412
Allungamento a rottura 800 % ASTM D 412
Altre ProprietàValoreUnitáNorma del test
Densità 890 kg/m³ ASTM D 792
Raccomandazione de Processabilità Stampaggio ad IniezioneValoreUnitáNorma del test
Pre-essiccamento - Temperatura 65 °C -
Pre-essiccamento - Tempo 2 - 4 h -
Temperatura di fusione 180 - 230 °C -
Temperatura dello stampo 15 - 50 °C -
Zona 1 120 - 160 °C -
Zona 2 160 - 230 °C -
Zona 3 180 - 230 °C -
Temperatura dell ugello 180 - 230 °C -
Velocità di Rotazione della Vite 50 - 100 rpm -
Contropressione 0.5 - 1.5 MPa -
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Caratteristiche speciali
Estab. agli U.V. o per applicaz.in esterni, Translucent
Caratteristiche
Buona adesione, Soft Feel
Resistenza Chimica
Resistenza chimica generale
Applicazioni
Polivalente
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.