Material datasheets available free. Online registration at: www.materialdatacenter.com
Guardian - EP - Elantas GmbH
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Guardian" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
... Assistance By 2010, the ambitious goal of automakers is to cut the number of fatal traffic accidents in half. To minimize dangerous situations, the auto industry is relying above all on advances in sensor-based systems. After all, electronic guardian angels react without any significant delay in ticklish situations with a preprogrammed response and do not even allow such situations to occur. Standard airbags and/or intelligent seat belt systems already protect the driver and passengers in th...
Kunststoffe international, 2015-12-17, Solutions for Manufacturing of the Future
...international readers will be familiar with both. Session 3 (Process Technology) concluded with a "Symbiosis of Measuring Technology and Injection Molding. Rod Groleau, founder of RJG Inc., Traverse City, MI/USA, thus disclosed himself as the guardian of process quality and champion of mold sensor technology – following the motto: "if you have no data [on what is going on in the mold], you only have an opinion."Prior to this, Dr. Oliver Becker, Executive Director Process Innovation at Yanfeng Gl...
Kunststoffe international, 2019-07-17, PET: From A to C
...heet without additives as a control sample from a batch of APET bottle flakes. This was followed by four further monofilms, which had different additive concentrations through gravimetric dosing (device type: Guardian, gravimetric batch blender for 6 components; manufacturer: Processcontrol, headquarters Birstein, Germany). All five sheets were 530 mm wide and 0.5 mm thick. An online viscometer monitored the melt viscosity during sheet extrusion, which as expected increased with the addition of...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.