Material datasheets available free. Online registration at: www.materialdatacenter.com
Electra - PE-UHMW - IMS Kunststoff AG
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Electra" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...mping forces of 800, 1,600 and 3,500 kN. After the new machine series has been launched entirely, it will comprise ten models with clamping forces of 500 to 6,500 kN, thus replacing the existing all-electric, hydraulic and hybrid Electra, K-Tec and Vitesse series, one by one, explained Dr. Thorsten Thümen, Director Research & Development at Ferromatik Milacron. The F-Series’ platform philosophy enables the user to combine the single modules to obtain a tailored product. “Subject to the respe...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.