Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 192 - TPU - Covestro Deutschland AG

Material Data Center offers the following functions for Desmopan 192:
unit conversion, PDF datasheet print, comparison with other plastics, parameters for material models, CAE Interfaces

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Proprietà Meccaniche - Altre Proprietà - Funzioni
Any use of this information falls under the rules of our disclaimer.
Testo del prodotto
  • Injection molding grade
  • with high mechanical strength for articles subject to wear.
    Application:
  • Shift lever balls
  • Roller tires
  • Coupling elements
  • Shoe heels
Proprietà MeccanicheValoreUnitáNorma del test
ISO Data
Carico Unitario al 10% di allungamento 4 MPa ISO 527
Carico Unitario al 100% di allungamento 9.5 MPa ISO 527
Carico Unitario al 300% di allungamento 17 MPa ISO 527
Carico Unitario a rottura TPE 52 MPa ISO 527
Allungamento a rottura TPE >300 % ISO 527
Deformazione residua dopo compressione a 70°C, 24h 40 % ISO 815
Resistenza alla lacerazione 85 kN/m ISO 34-1
Resistenza all'abrasione 32 mm³ ISO 4649
Durezza Shore A 92 - ISO 7619-1
Durezza Shore D 42 - ISO 7619-1
Altre ProprietàValoreUnitáNorma del test
Massa volumica 1230 kg/m³ ISO 1183
Funzioni
Viscosità-Velocità di taglio , Desmopan 192, TPU, Covestro
Sforzo di taglio-Velocità di taglio , Desmopan 192, TPU, Covestro
Modulo dinamico a taglio-temperatura , Desmopan 192, TPU, Covestro
Sforzi-deformazioni (TPE) , Desmopan 192, TPU, Covestro
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione, Estrusione Film, Estrusione Profilati, Estrusione di Lastre/Fogli, Altre Estrusioni
Forma fisica disponibile
Pellet, Granuli
Additivi
Agente di distacco
Disponibilità geografica
Nord America, Europa, Asia Oceano Pacifico, South and Central America, Near East/Africa
Altre informazioni
Stampaggio ad Iniezione
PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 90 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 210-225 °C
Mold temperature: 20-40 °C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.