Material datasheets available free. Online registration at: www.materialdatacenter.com
Ultrasint - PA11, PA6, PP, TPU - BASF SE
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Ultrasint" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...e high demands imposed on thermal and mechanical resilience: the plastics normally employed in the printing of 3D objects by laser sintering – PA11 and PA12 – fail to meet the mechanical and thermal requirements imposed by the application. Ultrasint PA6 MF is a mineral-filled polyamide 6 devised by Forward AM (a corporate brand of BASF 3D Printing Solutions GmbH, Heidelberg, Germany) that offers greater stiffness and is more resistant to heat. With most filled laser sintering powders, the fille...
Kunststoffe international, 2019-04-25, Putting 3D Printing to the Test
...Shore hardness.Materials that Are Difficult to PrintDr.-Ing. Claus Gabriel, Team Leader for 3D Printing Research at BASF SE in Ludwigshafen, Germany, reported on the development of a PA6-based material for selective laser sintering. Ultrasint PA 6 MF made it possible to control the distribution of the mineral filler particles so precisely that they did not separate and the desired concentration could be achieved regardless of the position in the build envelope. This was achieved by dispersing th...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.