Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 3473 - (PEI+PPS)-GF - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 3473:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
ULTEM 3473 resin is a reinforced blend of polyetherimide (PEI) and polyphenylenesulfide (PPS) that combines the benefits of an amorphous and a semicrystalline material.  Features are an excellent combination of reliable metallization, SMT lead free solder capability and providing extreme dimensional stability up to high temperatures. The material is a light weight alternative to Aluminum solutions, RoHS compliant, easy flowing and injection moldable.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt volume-flow rate, MVR 5.5 cm³/10min ISO 1133
Temperature 320 °C -
Load 5 kg -
ASTM Data
Mold Shrinkage, MD 0.0025 mm/mm ASTM D 955
Mold Shrinkage, TD 0.0035 mm/mm ASTM D 955
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 15900 MPa ISO 527
Stress at break 146 MPa ISO 527
Strain at break 1.65 % ISO 527
Flexural modulus, 23°C 14500 MPa ISO 178
Flexural strength 201 MPa ISO 178
ASTM Data
Tensile Modulus 15800 MPa ASTM D 638
Tensile Strength at Break 156 MPa ASTM D 638
Elongation at Break 1.8 % ASTM D 638
Flexural Modulus 14500 MPa ASTM D 790
Flexural Strength 231 MPa ASTM D 790
Izod Impact notched, 1/8 in 56 J/m ASTM D 256
Izod Impact unnotched, 1/8 in 390 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 250 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 275 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 19 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 25 E-6/K ISO 11359-1/-2
ASTM Data
DTUL @ 66 psi 275 °C ASTM D 648
DTUL @ 264 psi 249 °C ASTM D 648
Other propertiesValueUnitTest Standard
Density 1680 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 150 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
Melt temperature 315 - 335 °C -
Mold temperature 120 - 180 °C -
Zone 1 270 - 315 °C -
Zone 2 280 - 325 °C -
Zone 3 290 - 335 °C -
Nozzle temperature 300 - 335 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding, Compression Molding
Certifications
RoHS compliant
Applications
Electrical and Electronical
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.