Material datasheets available free. Online registration at: www.materialdatacenter.com
Stamylan - PE, PP - Saudi Basic Industries Corp. (Sabic)
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Stamylan" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...ation were all measured. Feed and Throughput Behaviour Various throughput rates were achieved, depending on the polymer and screw configuration. Fig.2 shows the throughput as a function of screw speed for a high-viscosity polypropylene (grade: Stamylan P14E10, manufacturer: DSM), a polystyrene (grade: PS168N, manufacturer: BASF), and a polyamide (grade: Ultramid A3K, manufacturer: BASF) at a back-pressure in front of the screw of 100bar. With increasing screw speed, the throughput at first inc...
Kunststoffe international, 2005-11-21, Multi-component Technique: Safeguarding the Future through Process Integration
Special Safeguarding the Future through Process Integration Multi-component Technique. Multi-component injection moulding has gained enormous importance over the last fifteen years. This is due both to the development of sophisticated products and to the efforts being made generally to economise. The combination of well-known processes, such as sandwich moulding with injection-compression moulding or the fluid injection technique, offers fresh possibilities for lowering costs and creating inn...
Kunststoffe international, 2005-11-21, Polypropylene-Cellulose Compounds
... fibre level without detailed process optimisation with respect to important characteristics. The products and devices used are specified in Table1. Compounding PP with Different Fibres A PP block copolymer optimised for injection moulding (grade: Stamylan P412MN10, manufacturer: DSM) with a density of 0.905g/cm3 and a melt-flow index (230°C, 50N) of 170dg/min (manufacturer’s data) was used as matrix material. The reinforcement was the high strength cellulose fibre Cordenka 700 (manufactur...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.