Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 518NJ - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 518NJ:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Thermal properties - Optical properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Product Texts
SABIC® LLDPE 518NJ is a fractional melt-index butene linear low density polyethylene resin. Films produced from this resin have high toughness, good puncture resistance, good heat sealing behaviour and excellent machinability on conversion lines. This grade is TNPP free.
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 0.5 g/10min ASTM D 1238
Temperature 190 °C -
Load 2.16 kg -
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 104 °C ISO 306
ASTM Data
Vicat Temperature 100 °C ASTM D 1525
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 13 % ASTM D 1003
Film PropertiesValueUnitTest Standard
ISO Data
Tensile Modulus, parallel 170 MPa ISO 527-3
Tensile Modulus, normal 180 MPa ISO 527-3
Stress at yield, normal 11 MPa ISO 527-3
Stress at break, parallel 40 MPa ISO 527-3
Stress at break, normal 32 MPa ISO 527-3
Trouser Tear resistance, parallel 30 N/mm ISO 6383-1
Trouser Tear resistance, normal 180 N/mm ISO 6383-1
ASTM Data
Tensile Modulus, MD 43 MPa ASTM D 882
Tensile Modulus, TD 850 MPa ASTM D 882
Tensile Strength at Yield, MD 13 MPa ASTM D 882
Tensile Strength at Yield, TD 11 MPa ASTM D 882
Tensile Strength at Break, MD 34 MPa ASTM D 882
Elongation at Break, MD 700 % ASTM D 882
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.