Material datasheets available free. Online registration at: www.materialdatacenter.com
Proteus - PP - Mitsubishi Chemical Advanced Materials NV
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Proteus" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...d ease of use. The AutoEvaluation software can automatically identify and evaluate thermal effects. In addition, the database-aided Identify program helps to objectively identify polymers. The identification software is a component of the Netzsch Proteus 7 evaluation software, which is based on a database system that can be extended with user libraries and curves.Testing and Classifying PS RecyclateFirst, the individual fractions are separated by color and then measured under identical condition...
Kunststoffe international, 2016-10-17, DSC Evaluation at a Click
...e differentiated comparison of DSC curves for known and unknown polymers with currently 600 reference curves of commercially available plastic materials. The database can be integrated into the curve identification system Identify [2, 3] within the Proteus Software from Netzsch-Gerätebau GmbH, Selb, Germany. This makes faster and more accurate statements possible in the analysis of unknown specimens.Three Application ScenariosFigure 1 shows how the DSC curve of an unknown polymer can be identifi...
Kunststoffe international, 2018-08-14, Polymer Powders in Additive Manufacturing
... PMMA; 2 measurements each.Thermal propertiesDifferential scanning calorimetry (DSC)Netzsch DSC 214 Polyma, Evaluating software: DSC 214, measurement and Netzsch Proteus TA analysisHeating rate 10 K/min;N2 atmosphere;Sample weight 6.5 to 7 mg; 3 measurements each.Fig. 3. Volume distribution of particle sizes using the characteristic D10, D50, and D90 values. In each case 10 %, 50 %, and 90 % of the particles are smaller than the specified diameter (source: Klevertec)Part 2 of the ArticleDevel...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.