Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXE154 - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXE154:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Product Texts
FDA compliant (color limited) PC.  2.5 MFR.  Potable water/extrusion blowmoldable.  ILLUMINATE special effects (fluorescent/edge glow colors).
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 2.5 g/10min ASTM D 1238
Temperature 300 °C -
Load 1.2 kg -
Mechanical propertiesValueUnitTest Standard
ASTM Data
Tensile Strength at Yield 62 MPa ASTM D 638
Tensile Strength at Break 65 MPa ASTM D 638
Elongation at Yield 7 % ASTM D 638
Elongation at Break 110 % ASTM D 638
Flexural Modulus 2340 MPa ASTM D 790
Rockwell Hardness R 118 - ASTM D 785
Taber Abrasion Resistance 10 mg/1000 cycles ASTM D 1044
Izod Impact notched, 1/8 in 747 J/m ASTM D 256
Izod Impact unnotched, 1/8 in 3200 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Burning behav. at thickness h HB class IEC 60695-11-10
Thickness tested 0.8 mm -
Yellow Card available yes - -
ASTM Data
Coefficient of Thermal Expansion, MD 68.4 E-6/K ASTM D 696
DTUL @ 66 psi 137 °C ASTM D 648
DTUL @ 264 psi 132 °C ASTM D 648
Vicat Temperature 157 °C ASTM D 1525
Thermal Conductivity, solid state 0.0274 W/(m K) ASTM C 177
Specific Heat 1250 J/(kg K) ASTM C 351
Optical propertiesValueUnitTest Standard
ASTM Data
Haze 1 % ASTM D 1003
Light Transmittance 88 % ASTM D 1003
Index of Refraction 1.59 - ASTM D 542
Other propertiesValueUnitTest Standard
Water Absorption, 24hr 0.15 % ASTM D 570
Water Absorption, Equilibrium 0.58 % ASTM D 570
Density 1190 kg/m³ ASTM D 792
Processing Recommendation ExtrusionValueUnitTest Standard
Pre-drying - Temperature 115 - 120 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
Melt temperature 265 - 275 °C -
Mold temperature 65 - 95 °C -
Zone 1 260 - 275 °C -
Zone 2 260 - 275 °C -
Zone 3 260 - 275 °C -
Zone 4 260 - 275 °C -
Zone 5 260 - 275 °C -
Nozzle temperature 270 - 280 °C -
Characteristics
Processing
Other Extrusion, Blow Molding
Certifications
Food contact, Food approval FDA 21 CFR
Applications
Electrical and Electronical, Packaging
Regional Availability
North America, Europe, Asia Pacific, South and Central America
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.