Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ FR Resin JK2500 - (PC+ABS)-CF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ FR Resin JK2500:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Electrical properties - Other properties - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Product Texts
LEXAN JK2500 compound is based on Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend containing 20% carbon fiber. Added features of this grade include: Electrically Conductive, EMI/RFI Shielding Effectiveness of 21 dB at 1.5 mm, Non-Brominated, Non-Chlorinated Flame Retardant.

UL Yellow Card Link E207780-228503
Processing/Physical CharacteristicsValueUnitTest Standard
ASTM Data
Melt Flow Index, MFI 25 g/10min ASTM D 1238
Temperature 300 °C -
Load 1.2 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 11100 MPa ISO 527
Yield stress 63 MPa ISO 527
Yield strain 2.2 % ISO 527
Stress at break 63 MPa ISO 527
Strain at break 2.3 % ISO 527
Flexural modulus 10100 MPa ISO 178
Izod impact strength, +23°C, 4mm 15 kJ/m² ISO 180/1U
Izod notched impact strength, +23°C, 4mm 5 kJ/m² ISO 180/1A
ASTM Data
Tensile Modulus 11030 MPa ASTM D 638
Tensile Strength at Yield 63 MPa ASTM D 638
Tensile Strength at Break 63 MPa ASTM D 638
Elongation at Yield 2.3 % ASTM D 638
Elongation at Break 2.4 % ASTM D 638
Flexural Modulus 9230 MPa ASTM D 790
Izod Impact notched, 1/8 in 53 J/m ASTM D 256
Izod Impact unnotched, 1/8 in 224 J/m ASTM D 256
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, 120°C/h 50N 100 °C ISO 306
Burning behav. at thickness h V-0 class IEC 60695-11-10
Thickness tested 1.0 mm -
ASTM Data
DTUL @ 66 psi 98 °C ASTM D 648
DTUL @ 264 psi 93 °C ASTM D 648
Vicat Temperature 111 °C ASTM D 1525
Electrical propertiesValueUnitTest Standard
ASTM Data
Surface Resistivity 10000 Ohm ASTM D 257
Volume Resistivity 100 Ohm*cm ASTM D 257
Other propertiesValueUnitTest Standard
Density 1310 kg/m³ ASTM D 792
Processing Recommendation Injection MoldingValueUnitTest Standard
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 3 - 4 h -
Melt temperature 270 - 310 °C -
Mold temperature 50 - 95 °C -
Zone 1 260 - 275 °C -
Zone 2 270 - 290 °C -
Zone 3 270 - 300 °C -
Screw speed 35 - 75 rpm -
Back pressure 0.3 - 0.7 MPa -
Characteristics
Processing
Injection Molding
Additives
Flame retarding agent
Special Characteristics
Increased electrical conductivity, Flame retardant
Features
EMI Attenuation/Shielding
Regional Availability
North America, Europe, Asia Pacific
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.