Complete Set of CAMPUSĀ® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Krynac - NBR - LANXESS Deutschland GmbH

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

A search for "Krynac" in Material Data Center leads to the following information:

Tradename: Krynac
Family: NBR
Producer: LANXESS Deutschland GmbH
2 hits in the literature database


Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.

Kunststoffe international, 2005-11-21, Driving the Automotive Industry: Engineering Elastomers
...nd high green strength, although it is fully amorphous. All products are E-XNBR. Methacrylic acid forms the ter component in higher carboxylated (5 to 7%) products from Lanxess (Krynac X7.40: better processing behaviour; Krynac X7.50: best vulcanisate properties) [13]. Zeon supplies the grades Nipol 1072, DN 631, NX775 (Sandouville, France, formerly Goodyear), while Nantex supplies the products Nancar 1072, the cement grade 1072 CG and the low-carboxylated XNBR Nancar 3245 C. Alongside these ar...

Kunststoffe international, 2010-04-20, From Natural Rubber to High-Tech Material
...made out of Baypren (CR) has been designed for several millions of load changes (photo: Lanxess) Fig. 6. When transporting paper the exceptionally abrasion resistant functional layer made from Krynac X 740 carboxylated NBR rubber on these machine belts ensures long service life and very good carriage properties (photo: Lanxess) Fig. 7. The particularly high flow HNBR rubber Therban AT 3400 VP is suitable for liquid injection molding (LIM), the manufacture of inplace gaskets (IPGs) and the produc...


Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.

Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.