Eltex - PE-HD, PP - INEOS Olefins & Polymers

Kunststoffe international, 2005-11-21, Joining Pipes: An Accelerated Butt Welding Process
...chnik has now released the CTC process for PE butt welding with the new control unit and the hydraulic butt welding machines for the diameter range of 40 to 315mm. Test series with two pipe materials (Hostalen CRP 100 black and Eltex TUB 121) in an independent test laboratory showed that the shorter cooling time in the SUVI CTC process has no negative influence on the long-term performance of the heated tool butt weld in the tested PE100 materials [2]. To simulate installation loads, the flexura...

Kunststoffe international, 2005-11-21, Permanent Antistatic Behaviour
...ity of these materials opens up novel applications for them, particularly in the contacting and bonding of electrical assemblies with simultaneous mechanical fixing [4]. Acknowledgement We would like to thank the German Research Association and Eltex GmbH, Weil am Rhine/Germany, for their support for this work. The Authors of this Article Torsten Prasse, born in 1970, gained his doctorate at the Technical University of Hamburg-Harburg/Germany in the field of electrically conductive composites...

Kunststoffe international, 2006-09-28, From Pretreatment to Finishing
...hat often appear after treatment in a corona discharge or as a result of deep drawing with electrostatic assist exist on the upper and lower surfaces of the film. Strong electrical arcing is then a typical phenomenon. Development of a new process by Eltex Elektrostatik GmbH, Weil am Rhein, permits for the first time measurement, and on this basis, noncontact neutralization of electrical double layers. Fig. 4 shows the EMD51 discharge station schematically. Using the measuring electrode A, the me...