Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EasyFil™ PLA - PLA - Formfutura BV

Material Data Center offers the following functions for EasyFil™ PLA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other EasyFil datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Film Properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
Other Standards[S]
Melt Flow Index, MFI 6 g/10min
S: These properties are reported by the producer according standards that are different to our defaults.
Mechanical propertiesValueUnitTest Standard
Other Standards[S]
Flexural Modulus 2392 MPa
Flexural Strength 55.2 MPa
S: These properties are reported by the producer according standards that are different to our defaults.
Thermal propertiesValueUnitTest Standard
ASTM Data
Melting Temperature 210 °C ASTM D 3418
Optical propertiesValueUnitTest Standard
ASTM Data
Gloss 90[1] - ASTM D 2457
Haze 2.1 % ASTM D 1003
1: 20°
Other propertiesValueUnitTest Standard
Density 1240 kg/m³ ASTM D 792
Film PropertiesValueUnitTest Standard
ASTM Data
Tensile Modulus, MD 3310 MPa ASTM D 882
Tensile Strength, MD 110 MPa ASTM D 882
Elongation at Break, MD 160 % ASTM D 882
Characteristics
Processing
Additive Manufacturing
Delivery form
Monofilament
Special Characteristics
High impact or impact modified
Features
Good Adhesion
Certifications
Contains renewable resources
Regional Availability
Europe
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.