Material datasheets available free. Online registration at: www.materialdatacenter.com
Atlac - VE - Aliancys AG
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Atlac" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...D layers. An overall composite made up of seven layers was stitched with a twisted E-glass thread employing a stitch length of 5mm, and one laminate was left unstitched. The stitched and non-stitched composites were subsequently impregnated with Atlac 430 vinyl ester resin from DSM BASF Structural Resins employing the DP-RTM process (Differential Pressure Resin Transfer Moulding). The thickness of the sheets produced was approximately 5mm. The impact strength tests in the low velocity range wer...
Kunststoffe international, 2005-11-21, Thermosets
... AVT-TV) Fig.2. Intense colours can be achieved with the UP pultrusion resin Dion 31066 (source: Reichhold) Fig.3. Relining a sewerage system with glass-fibre-reinforced tubes produced from the new vinyl ester resin range Atlac E-Nova (source: DSM Composite Resins) Fig.4. The vinyl ester resins Atlac E-Nova PL1645 and PL2645, specially developed for pultrusion, enable corrosion-resistant parts to be produced at twice the normal pultrusion rate (source: DSM Composite Resins) Fig.5. Spiral flo...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.