Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Asaflex™ 835 - TPS - Asahi Kasei

Material Data Center offers the following functions for Asaflex™ 835:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Asaflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Optical properties - Other properties - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Product Texts
With wax.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 6 g/10min ISO 1133
Temperature 200 °C -
Load 5 kg -
Molding shrinkage, parallel 0.5 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Strength 18 MPa ISO 527
Flexural modulus, 23°C 1100 MPa ISO 178
Flexural strength 21 MPa ISO 178
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C N kJ/m² ISO 179/1eA
Type of failure (P) - -
Shore D hardness 55 - ISO 7619-1
Rockwell hardness R 10 - ISO 2039-2
Thermal propertiesValueUnitTest Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 60 °C ISO 75-1/-2
Vicat softening temperature, A 72 °C ISO 306
Optical propertiesValueUnitTest Standard
ISO Data
Haze 2 - ISO 14782
Other Standards[S]
Light Transmittance 89 % ISO 13468
S: These properties are reported by the producer according standards that are different to our defaults.
Other propertiesValueUnitTest Standard
Water absorption 0.1 % Sim. to ISO 62
Density 1010 kg/m³ ISO 1183
Processing Recommendation Injection MoldingValueUnitTest Standard
Melt temperature 180 - 220 °C -
Mold temperature 50 °C -
Zone 1 180 - 200 °C -
Nozzle temperature 200 °C -
Injection pressure 67 MPa -
Back pressure 6 MPa -
Processing Recommendation ExtrusionValueUnitTest Standard
Mold temperature 60 - 80 °C -
Zone 1 170 °C -
Zone 2 180 °C -
Zone 3 185 °C -
Zone 4 190 °C -
Zone 5 200 °C -
Nozzle temperature 200 °C -
Characteristics
Processing
Injection Molding, Other Extrusion
Special Characteristics
High impact or impact modified, Transparent
Features
High Gloss, Copolymer
Applications
Packaging
Regional Availability
North America, Europe, Asia Pacific, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.