Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin HU2100 - PEI-GF10 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin HU2100:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). US FDA and European Food Contact approved. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 9 cm³/10min ISO 1133
温度 360 °C -
载荷 5 kg -
ASTM数据
熔融指数, MFI 7 g/10min ASTM D 1238
温度 337 °C -
负载 6.6 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 4500 MPa ISO 527
屈服应力 115 MPa ISO 527
屈服伸长率 4 % ISO 527
断裂应力 115 MPa ISO 527
断裂伸长率 4 % ISO 527
弯曲模量 4500 MPa ISO 178
简支梁缺口冲击强度, +23°C 7 kJ/m² ISO 179/1eA
Izod冲击强度, +23°C 30 kJ/m² ISO 180/1U
Izod impact strength, +23°C, 4mm 30 kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm 30 kJ/m² ISO 180/1U
ASTM数据
拉伸模量 4680 MPa ASTM D 638
屈服应力 114 MPa ASTM D 638
断裂拉伸强度 115 MPa ASTM D 638
屈服伸长率 6 % ASTM D 638
断裂伸长率 6 % ASTM D 638
弯曲模量 5500 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 53 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 53 J/m ASTM D 256
温度 -30 °C -
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 205 °C ISO 75-1/-2
维卡软化温度, B 212 °C ISO 306
维卡软化温度, 120°C/h 50N 217 °C ISO 306
线性热膨胀系数, 平行 26 E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 60 E-6/K ISO 11359-1/-2
厚度为h时的燃烧性 V-0 class IEC 60695-11-10
测试用试样的厚度 0.4 mm -
Yellow Card 现存 是的 - -
厚度为h时的5V燃烧性 5VA class IEC 60695-11-20
测试用试样的厚度 1.9 mm -
Yellow Card 现存 是的 - -
ASTM数据
热释放速率, 平行 32.4 E-6/K ASTM D 696
热释放速率, 垂直 60 E-6/K ASTM D 696
DTUL @ 264 psi 205 °C ASTM D 648
维卡温度 223 °C ASTM D 1525
电性能价值单位Test Standard
ISO数据
介电强度 15 kV/mm IEC 60243-1
相对漏电起痕指数 150 - IEC 60112
ASTM数据
耐电弧性 90 s ASTM D 495
其它性能价值单位Test Standard
吸水性 1 % 类似ISO 62
吸湿性 0.6 % 类似ISO 62
密度 1340 kg/m³ ISO 1183
密度 1340 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 150 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 370 - 410 °C -
模具温度 140 - 180 °C -
加料温度 80 - 120 °C -
1区 340 - 395 °C -
2区 350 - 405 °C -
3区 360 - 415 °C -
典型数据
加工方法
注塑
特殊性能
阻燃的, 经热稳处理的/耐热的, 消毒, 环氧乙烷灭菌(EtO), 蒸汽灭菌, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
特征
无定形, 防蠕变, 好粘附性能, 低烟量
耐化学试剂
通用耐化学性, 水解稳定, 抗辐射性
Certifications
可食品接触的, FDA 21 CFR认证, 医用级, Biocompatibility ISO 10993, US药物六级认证
应用
药物
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.