Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 9085 - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 9085:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑） - 加工推荐（挤出）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
ULTEM 9085 resin is a  polyetherimide blend. The material is designed for use in Aerospace cabin interiors but can also be used for FDM printing and in e.g. Rail applications. The material meets Aerospace FAR25.853 and OSU55/55 heat release requirements. It is approved by main Aerospace OEMs. Material has Rail EN45545 R6-HL3 rating. The material may offer excellent flow, stiffness and ductility balance, enabling thin wall lightweight designs. Material is opaque and can be custom colored.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 40 cm³/10min ISO 1133
温度 340 °C -
载荷 5 kg -
ASTM数据
熔融指数, MFI 8.9 g/10min ASTM D 1238
温度 295 °C -
负载 6.6 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 2850 MPa ISO 527
屈服应力 94 MPa ISO 527
屈服伸长率 6.7 % ISO 527
断裂伸长率 70 % ISO 527
弯曲模量, 23°C 2700 MPa ISO 178
简支梁冲击强度, +23°C N kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C N kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 10 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 8 kJ/m² ISO 179/1eA
Izod冲击强度, +23°C N kJ/m² ISO 180/1U
悬臂梁缺口冲击强度, +23°C 10 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 8 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 -30 °C -
洛克硬度 M 115 - ISO 2039-2
ASTM数据
拉伸模量 3000 MPa ASTM D 638
屈服应力 86 MPa ASTM D 638
屈服伸长率 7 % ASTM D 638
断裂伸长率 70 % ASTM D 638
弯曲模量 2800 MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 115 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 65 J/m ASTM D 256
温度 -30 °C -
Izod冲击强度, 1/8 in N J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 152 °C ISO 75-1/-2
热变形温度, 0.45 MPa 169 °C ISO 75-1/-2
维卡软化温度, B 173 °C ISO 306
线性热膨胀系数, 平行 65 E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 70 E-6/K ISO 11359-1/-2
ASTM数据
热释放速率, 平行 65 E-6/K ASTM D 696
热释放速率, 垂直 70 E-6/K ASTM D 696
DTUL @ 66 psi 169 °C ASTM D 648
DTUL @ 264 psi 153 °C ASTM D 648
氧指数 49 % ASTM D 2863
其它性能价值单位Test Standard
吸水性 0.7 % 类似ISO 62
吸湿性 0.4 % 类似ISO 62
密度 1340 kg/m³ ISO 1183
密度 1340 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 120 - 130 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 330 - 350 °C -
模具温度 120 - 150 °C -
1区 315 - 340 °C -
2区 325 - 345 °C -
3区 330 - 350 °C -
喷嘴温度 330 - 350 °C -
背压 0.3 - 0.7 MPa -
加工推荐（挤出）价值单位Test Standard
Type of extrusion profile - -
预干燥-温度 120 - 130 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 280 - 310 °C -
加料温度 80 - 100 °C -
1区 265 - 275 °C -
2区 280 - 295 °C -
3区 290 - 305 °C -
4区 295 - 310 °C -
喷嘴温度 260 - 310 °C -
典型数据
加工方法
注塑, 异型材挤出成型, 片材挤出成型, 热成型, Additive Manufacturing
特殊性能
阻燃的, 经热稳处理的/耐热的, Opaque
特征
无定形, 防蠕变, 脆性, 好粘附性能, 低烟量
耐化学试剂
通用耐化学性, 水解稳定
应用
航天航空, Filament for 3D Printing
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.