Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 1010UCL - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 1010UCL:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
ULTEM 1010UCL resin is an amorphous, transparent polyetherimide (PEI) thermoplastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. 1010UCL offers the same performance as ULTEM 1010 resin and offers further enhanced cleanliness control for (optical) applications.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 13 cm³/10min ISO 1133
温度 340 °C -
载荷 5 kg -
ASTM数据
熔融指数, MFI 17.8 g/10min ASTM D 1238
温度 337 °C -
负载 6.6 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 3200 MPa ISO 527
屈服应力 105 MPa ISO 527
屈服伸长率 6 % ISO 527
断裂应力 85 MPa ISO 527
断裂伸长率 60 % ISO 527
弯曲模量, 23°C 3300 MPa ISO 178
Izod冲击强度, +23°C N kJ/m² ISO 180/1U
悬臂梁缺口冲击强度, +23°C 5 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 5 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 -30 °C -
球压硬度 140 MPa ISO 2039-1
ASTM数据
拉伸模量 3580 MPa ASTM D 638
屈服应力 110 MPa ASTM D 638
屈服伸长率 7 % ASTM D 638
断裂伸长率 60 % ASTM D 638
弯曲模量 3510 MPa ASTM D 790
洛克硬度 M 109 - ASTM D 785
Taber耐磨损性 10 mg/1000 cycles ASTM D 1044
Gardner冲击强度 33 J ASTM D 2794,4226,5420
悬臂梁缺口冲击强度, 1/8 in 32 J/m ASTM D 256
Izod冲击强度, 1/8 in 1340 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 190 °C ISO 75-1/-2
热变形温度, 0.45 MPa 200 °C ISO 75-1/-2
维卡软化温度, A 215 °C ISO 306
维卡软化温度, B 211 °C ISO 306
线性热膨胀系数, 平行 50 E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 50 E-6/K ISO 11359-1/-2
ASTM数据
热释放速率, 平行 55.8 E-6/K ASTM D 696
DTUL @ 66 psi 207 °C ASTM D 648
DTUL @ 264 psi 198 °C ASTM D 648
维卡温度 218 °C ASTM D 1525
热导率, 固态 0.0317 W/(m K) ASTM C 177
电性能价值单位Test Standard
ISO数据
相对介电常数, 1MHz 2.9 - IEC 62631-2-1
介质损耗因子, 1MHz 60 E-4 IEC 62631-2-1
体积电阻率 1E13 Ohm*m IEC 62631-3-1
表面电阻率 >1E15 Ohm IEC 62631-3-2
介电强度 33 kV/mm IEC 60243-1
ASTM数据
电介质强度, 短时 32.7 kV/mm ASTM D 149
体积电阻率 1E17 Ohm*cm ASTM D 257
其它性能价值单位Test Standard
吸水性 1.25 % 类似ISO 62
吸湿性 0.7 % 类似ISO 62
密度 1270 kg/m³ ISO 1183
吸水率, 24小时 0.25 % ASTM D 570
吸水率, 平衡 1.25 % ASTM D 570
密度 1270 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 150 °C -
预干燥-时间 4 - 6 h -
加工湿度 ≤0.02 % -
注塑熔体温度 350 - 400 °C -
模具温度 135 - 165 °C -
1区 330 - 400 °C -
2区 340 - 400 °C -
3区 345 - 400 °C -
喷嘴温度 345 - 400 °C -
螺杆转速 40 - 70 rpm -
背压 0.3 - 0.7 MPa -
典型数据
加工方法
注塑
特殊性能
阻燃的, 经热稳处理的/耐热的, 透明.
特征
无定形, 防蠕变, 好粘附性能, 低烟量
耐化学试剂
通用耐化学性, 水解稳定
应用
航天航空, 汽车, 建材, 电子电气, 通用, 包装, 运动器械
地区供应
北美, 欧洲, 亚太, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.