Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 1010P200 - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 1010P200:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
ULTEM 1010P200 Resin is an unreinforced amorphous polyetherimide (PEI) powder. This powder is available with an average particle size (D50) of 200 micron and a maximum particle size (D100) of 450 micron. It may offer a high glass transition temperature (Tg) of 217°C. It has a lower molecular weight than 1000P200. Features are excellent mechanical, electrical and dimension properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material and is inherently flame retardant. The material is RoHS Compliant. The base material is transparent amber colored.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 25 cm³/10min ISO 1133
温度 360 °C -
载荷 5 kg -
ASTM数据
熔融指数, MFI 17.8 g/10min ASTM D 1238
温度 337 °C -
负载 6.6 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 3200 MPa ISO 527
屈服应力 110 MPa ISO 527
屈服伸长率 6 % ISO 527
断裂伸长率 50 % ISO 527
弯曲模量 3300 MPa ISO 178
简支梁缺口冲击强度, +23°C 4 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 4 kJ/m² ISO 179/1eA
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm N kJ/m² ISO 180/1U
悬臂梁缺口冲击强度, +23°C, 4mm 5 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 4mm 5 kJ/m² ISO 180/1A
洛克硬度 M 106 - ISO 2039-2
球压硬度 140 MPa ISO 2039-1
ASTM数据
拉伸模量 3350 MPa ASTM D 638
屈服应力 115 MPa ASTM D 638
屈服伸长率 7 % ASTM D 638
断裂伸长率 60 % ASTM D 638
弯曲模量 3200 MPa ASTM D 790
洛克硬度 M 109 - ASTM D 785
Taber耐磨损性 10 mg/1000 cycles ASTM D 1044
悬臂梁缺口冲击强度, 1/8 in 32 J/m ASTM D 256
低温悬臂梁缺口冲击强度, Low-Temperature 41 J/m ASTM D 256
温度 -30 °C -
Izod冲击强度, 1/8 in 1600 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 192 °C ISO 75-1/-2
热变形温度, 0.45 MPa 209 °C ISO 75-1/-2
维卡软化温度, A 215 °C ISO 306
维卡软化温度, B 211 °C ISO 306
维卡软化温度, 120°C/h 50N 212 °C ISO 306
热导率 0.22 W/(m K) DIN 52616
ASTM数据
DTUL @ 66 psi 207 °C ASTM D 648
DTUL @ 264 psi 190 °C ASTM D 648
维卡温度 211 °C ASTM D 1525
热导率, 固态 0.0317 W/(m K) ASTM C 177
电性能价值单位Test Standard
ISO数据
相对介电常数, 1MHz 2.9 - IEC 62631-2-1
介质损耗因子, 1MHz 60 E-4 IEC 62631-2-1
体积电阻率 1E13 Ohm*m IEC 62631-3-1
表面电阻率 >1E15 Ohm IEC 62631-3-2
介电强度 33 kV/mm IEC 60243-1
相对漏电起痕指数 150 - IEC 60112
ASTM数据
电介质强度, 短时 19.7 kV/mm ASTM D 149
体积电阻率 >1E15 Ohm*cm ASTM D 257
其它性能价值单位Test Standard
吸水性 1.25 % 类似ISO 62
密度 1270 kg/m³ ISO 1183
密度 1270 kg/m³ ASTM D 792
典型数据
特殊性能
透明.
耐化学试剂
通用耐化学性
Certifications
RoHS
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.