Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TABOREX TA 7400 LD - (PE-LD) - Silon s.r.o.

Material Data Center offers the following functions for TABOREX TA 7400 LD:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Taborex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 其它性能 - 加工推荐（挤出）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
TABOREX TA 7400 LD is a crosslinkable compound made by Silane grafted ethylene polymer. This graft polymer constitutes together with a TABOREX Masterbatch containing the crosslinking catalyst a „SIOPLAS SYSTEM“. This system allows the compound to be extruded as a normal thermoplastic polymer and will attain a high level of crosslinking in the processed form. The final product provides all the superior properties associated with crosslinked polyethylene.
Crosslinking Cure
The following methods are recommended:
• Autoclave using saturated steam at 90–100 °C (optimal methode)
• By immersion in hot water at 80–95 °C
• Exposure to low pressure steam
The period required to obtain the final gel content depends on the wall thickness and
the temperature. The exposure times are in the range of 2–4 hours.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 9 g/10min ISO 1133
温度 190 °C -
负载 5 kg -
其它性能价值单位Test Standard
密度 925 kg/m³ ISO 1183
Bulk density 500 kg/m³ -
加工推荐（挤出）价值单位Test Standard
1区 160 - 170 °C -
2区 170 - 180 °C -
3区 170 - 190 °C -
4区 170 - 190 °C -
喷嘴温度 190 - 220 °C -
典型数据
加工方法
薄膜挤出成型, 管材挤出
特征
可交联的
耐化学试剂
耐环境应力裂纹性
地区供应
欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.