Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PMMA 17OP - PMMA - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PMMA 17OP:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 光学特性 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
SABIC® PMMA 17OP is an optical LGP extrusion grade with low foreign matter count and low UV absorbance. The grade is available in pellet form.
机械性能价值单位Test Standard
ISO数据
拉伸强度 75 MPa ISO 527
弯曲模量, 23°C 3300 MPa ISO 178
弯曲强度 130 MPa ISO 178
洛克硬度 98 - ISO 2039-2
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 94 °C ISO 75-1/-2
维卡软化温度, B 101 °C ISO 306
ASTM数据
热导率, 固态 0.0288 W/(m K) ASTM C 177
光学特性价值单位Test Standard
ISO Data
浑浊率 0.3 - ISO 14782
透光率 93 % ISO 13468-1, -2
其它性能价值单位Test Standard
密度 1190 kg/m³ ISO 1183
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.