Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PC Resin PC1000R - Americas - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PC Resin PC1000R - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 光学特性 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
PC1000R resin is a medium-low flow (MFR = 10 at 300?C/1.2kg), heat stabilized, polycarbonate product with mold release designed for use in the general purpose molding market. It is available exclusively at www.sabicpc.com
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 9 cm³/10min ISO 1133
温度 300 °C -
载荷 1.2 kg -
ASTM数据
熔融指数, MFI 10 g/10min ASTM D 1238
温度 300 °C -
负载 1.2 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 2350 MPa ISO 527
屈服应力 63 MPa ISO 527
屈服伸长率 6 % ISO 527
断裂伸长率 50 % ISO 527
弯曲模量 2300 MPa ISO 178
洛克硬度 R 120 - ISO 2039-2
ASTM数据
拉伸模量 2350 MPa ASTM D 638
屈服应力 63 MPa ASTM D 638
屈服伸长率 6 % ASTM D 638
断裂伸长率 70 % ASTM D 638
弯曲模量 2300 MPa ASTM D 790
洛克硬度 R 120 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 800 J/m ASTM D 256
Izod冲击强度, 1/8 in N J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 127 °C ISO 75-1/-2
热变形温度, 0.45 MPa 138 °C ISO 75-1/-2
维卡软化温度, B 143 °C ISO 306
1.5mm名义厚度时的燃烧性 V-2 class IEC 60695-11-10
测试用试样的厚度 1.6 mm -
热导率 0.2 W/(m K) DIN 52616
ASTM数据
DTUL @ 66 psi 138 °C ASTM D 648
DTUL @ 264 psi 127 °C ASTM D 648
维卡温度 143 °C ASTM D 1525
热导率, 固态 0.0288 W/(m K) ASTM C 177
电性能价值单位Test Standard
ISO数据
相对介电常数, 1MHz 3 - IEC 62631-2-1
介质损耗因子, 100Hz 10 E-4 IEC 62631-2-1
介质损耗因子, 1MHz 100 E-4 IEC 62631-2-1
体积电阻率 >1E13 Ohm*m IEC 62631-3-1
介电强度 27 kV/mm IEC 60243-1
ASTM数据
电介质强度, 短时 27 kV/mm ASTM D 149
耗散因素, 60 Hz 0.001 - ASTM D 150
耗散因素, 1 MHz 0.01 - ASTM D 150
电介质常数, 60 Hz 3 - ASTM D 150
电介质常数, 1 MHz 3 - ASTM D 150
体积电阻率 1E15 Ohm*cm ASTM D 257
光学特性价值单位Test Standard
ASTM数据
雾度 0.8 % ASTM D 1003
光透射率 90 % ASTM D 1003
折射率 1.59 - ASTM D 542
其它性能价值单位Test Standard
吸水性 0.35 % 类似ISO 62
密度 1200 kg/m³ ISO 1183
吸水率, 平衡 0.35 % ASTM D 570
密度 1200 kg/m³ ASTM D 792
加工推荐（注塑）价值单位Test Standard
预干燥-温度 ≤120 °C -
预干燥-时间 2 - 4 h -
注塑熔体温度 280 - 310 °C -
模具温度 80 - 110 °C -
1区 260 - 280 °C -
2区 270 - 290 °C -
3区 280 - 310 °C -
喷嘴温度 270 - 290 °C -
典型数据
特殊性能
经热稳处理的/耐热的
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.