Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Polimaxx U510B - (PE-UHMW) - IRPC

Material Data Center offers the following functions for Polimaxx U510B:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Polimaxx datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
热性能 - 其它性能 - 模塑测量的特殊性能
Any use of this information falls under the rules of our disclaimer.
热性能价值单位Test Standard
ISO数据
维卡软化温度, A 126 °C ISO 306
ASTM数据
熔点 132 °C ASTM D 3418
其它性能价值单位Test Standard
密度 940 kg/m³ ISO 1183
Intrinsic Viscosity 22.5 dl/g -
Bulk density 450 kg/m³ -
模塑测量的特殊性能价值单位Test Standard
ISO数据
粘数. 2700 cm³/g ISO 307, 1157, 1628
典型数据
供货形式
粉料
特殊性能
高冲击韧性的/经抗冲改性的
特征
Tribologic Grade
Certifications
RoHS
地区供应
欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.