Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Marlex® HXM 50100 - (PE-HD) - Chevron Phillips Chemical Co. LP

Material Data Center offers the following functions for Marlex® HXM 50100:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Marlex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 10 g/10min ASTM D 1238
温度 190 °C -
负载 21.6 kg -
机械性能价值单位Test Standard
ASTM数据
屈服应力 24.8 MPa ASTM D 638
断裂伸长率 700 % ASTM D 638
弯曲模量 1207 MPa ASTM D 790
邵氏硬度D 68 - ASTM D 2240
热性能价值单位Test Standard
ASTM数据
DTUL @ 66 psi 78.3 °C ASTM D 648
维卡温度 126 °C ASTM D 1525
其它性能价值单位Test Standard
密度 948 kg/m³ ASTM D 792
典型数据
加工方法
吹塑, 热成型
供货形式
粒料
特殊性能
高冲击韧性的/经抗冲改性的
特征
少气味, 熔体强度, 共聚物, 己烯共聚物
耐化学试剂
耐环境应力裂纹性
Certifications
可食品接触的, FDA 21 CFR认证
应用
汽车, 包装, 运动器械
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.